261nm連續紫(zi)外激光器UV-F-261 1~5mW
UV-F-261/1~5mW - up to 5mW, 261nm CW ultraviolet DPSS laser
Model UV-F-261 Wavelength (nm) 261±1 Output power (mW) >1, 2, ..., 5 Transverse mode Near TEM00 Operating mode CW Power stability (rms, over 4 hours) <10% Warm-up time (minutes) <10 M2 factor <2.0 Dimensions of beam at the aperture (mm) ~2.0 Beam height from base plate (mm) 45 Polarization ratio >50:1 (Horizontal) Operating temperature (℃) 10~35 Power supply (90-264VAC or 5VDC) PSU-H-FDA Expected lifetime (hours) 5000 Warranty 1 year
Model
UV-F-261
Wavelength (nm)
261±1
Output power (mW)
>1, 2, ..., 5
Transverse mode
Near TEM00
Operating mode
CW
Power stability (rms, over 4 hours)
<10%
Warm-up time (minutes)
<10
M2 factor
<2.0
Dimensions of beam at the aperture (mm)
~2.0
Beam height from base plate (mm)
45
Polarization ratio
>50:1 (Horizontal)
Operating temperature (℃)
10~35
Power supply (90-264VAC or 5VDC)
PSU-H-FDA
Expected lifetime (hours)
5000
Warranty
1 year
261nm調Q脈沖紫外激光器MPL-F-261 0.1~4uJ/1~10mW
MPL-F-261/0.1~4μJ/1~10mW - up to 4 μJ, 261 nm ultraviolet passively Q-switched pulse laser
MPL-F-261
Central wavelength (nm)
Output average power (mW)
1~10
Frequency conversion of Q-switched pulsed laser
Single pulse energy (μJ)
0.1~4
Pulse duration (ns)
~4
Peak power (W)
25~1000
Rep. rate (kHz)
FIXED
Setting up one fixed rep. rate internal between 0.1Hz-1kHz with stable pulse energy, pulse duration and pulse period.
EXT TRIG
0.1Hz-1kHz by external trigger with stable pulse energy, pulse duration and pulse period.
QCW
QCW state with one rep. rate between 2k- 3kHz.
Average power (mW)
Average power (mW) = Single pulse energy (μJ) * Rep. rate (kHz)
Ave power stability (over 4 hours)
<5%, <10%
<1. 5
Spectral purity
>99%
Beam parameters
Elliptical (4:1), Beam spot ~2mm
>50:1
Power supply (90-264VAC)
Warranty period
Remarks
Please Note: because of the Walk-off effect of Nonlinear crystals, the beam quality of UV laser is not so good as that of 1047/523nm laser.